High speed Barriers

点击数：11162017-02-09 14:18:05　来源: szzfkj.cn

High speed Barriers:
This machine adopts a railing machine servo intelligent control maintenance of AC servo motor combination, the use of advanced technology, so that the brake rod can accurately adjust the free landing time, the optimal rotation combination can achieve a long time without maintenance, reduce the structure of 2 limit switches and mechanical clutch machinery etc. also, the relative wear down machine, improve the reliability of the whole machine, the actual uninterrupted test has more than 5 million times, on / off the pole fast smooth, noise less than 65 decibels, 2 years warranty. The power supply can be automatically and quickly started, and the lever of the brake rod can be rotated by hand without tools. No AC area, available 24V DC battery power supply.
Technical data:

Barrier Gate function specification:

The heart of the barrier is the combination of the AC servo maintenance free direct current motor with its intelligent control mechanism. This combination,developed especially for this application represents a substantial technological leap forward due to its flexible acceleration and deceleration and its independently adjustable opening and closing times. This further optimizes the movements achieving considerable service life with long maintenance-free intervals. Hall sensors integrated into the motor provide precise data regarding the position of the barrier boom at any particular instant, and they also provide the control system with a way of verifying the optimum acceleration and braking characteristics. By calculating the exact position of the boom,it is possible to make feedback directly available in any position in the form of zero potential signals. This removes the need for mechanical limit switches which are prone to wear and tear. Shenzhen zhongfan product range impresses with sophisticated and enduring design, extremely low operational costs and almost maintenance-free technology.

At present, there are some options for the aluminum box 300*350*1010mm and the steel box 320*320*1010mm.

1: power failure automatic gate, no clutch design, without manual intervention. Incoming call automatic reset, restore to turn off state. Truly no one on duty. If you need special power need manual intervention, it can be set up is not simple, after a power outage or self-locking self-locking, can choose, you can gently rotate poles to manual rod / drop lever, no need to open the gate of the chassis.

2: a variety of input and output modes can be selected, often open and close can be selected.

3: rod angle can be adjusted from 55~90 degrees, 10 degree resolution.

4: Closing speed can be adjusted, 0.9s, 1.3s, 1.8s.

5:all kinds of state signal output.

6: barrier gate running state OK signal output.

7: alarm signal output.

8: traffic lights signal relay output.

9: external Vehicle detection signal, infrared sensor signal.

10: AC90V~AC264V50/60Hz, the global universal voltage standard. Also available 24V battery power supply.（No mains place to pick up solar energy,wind energy to recharge battery）

11: the Opening time is less than 0.9s.

12: the running noise is less than 60dB.

13: standard file length 3m.

14: Power consumption: 50W, maximum power 100W.

15:It is also a simple matter to change the handing on-site from right-axial to left-axial.

16: automatically detect whether the balance spring fatigue or damage, if the spring fatigue tips to adjust, if you can not adjust the spring, replace the spring is very easy, no need to use tools, hand can be replaced.

17: remote control open / close and car parking system control open / close, separate input, respectively, the number of corresponding statistics.

18: the RS232 or RS485 connected to PC of the parking system.